 OmniPeg-PCI Solid
State Encoder/Decoder Cards |
| These breakthrough products from OmniMedia Technology
bring the power and functionality of latest video compression technology
to streaming application. Capable of real-time MPEG-4, -2 and -1 encoding
and decoding, these products provide truly affordable streaming of
video for broadcasting, monitoring traffic, video surveillance and
web casting. Available as OmniPeg4-PCI with BNC or RCA connectors
these cards offer a general purpose solution for streaming. |
OmniPeg-PCI-B
MPEG-4, -2, -1 real time streaming encoder/decoder cards with BNC connectors |
 |
OmniPeg-PCI-R
MPEG-4, -2, -1 real time streaming encoder/decoder cards with RCA connectors |
 |
| Support for MPEG-1, MPEG-2 MP@ML, MPEG-4 Simple Profile @ L1, L2 and L3, with extensions to full D1 and interlaced video. The OmniPeg-PCI cards are real-time MPEG-4, -2 and -1 audio/video/system CODEC (simultaneous compression and decompression, encode/decode) that fully complies with ISO/IEC-11172-2, ISO/IEC-13818-2 and ISO/IEC-14496-2. The cards accept uncompressed ITU-R.BT-656 video and I2S audio, compress the video into MPEG-4, -2 or -1 formats and compress the audio into MPEG-1, MPEG-2, MP3, AAC or AC-3 audio formats, and output them as transport streams for network applications or program streams for storage applications. |
| |
| OmniPeg-DVB Solid
State Encoder, Decoder and Transcoder Cards |
These breakthrough products from OmniMedia Technology bring the power and functionality of latest video compression technology to streaming application. The OmniPeg-DVB-ASI-T™ is a single board transport stream encoder and decoder. At this time, it is unique in that it encodes and decodes MPEG-2 and MPEG-4. The OmniPeg-DVB-ASI-T™ supports composite video input and encodes to full D1 resolution with 4: 2: 0 chroma sampling. One of its strengths is its performance at low bit rates. Video quality looks very good with MPEG-2 at 3.5 Mbps and MPEG-4 at 2 Mbps. Please note that this card is designed for OEMs and there is no end user software at this time. There are SDK’s for Windows and Linux.
|
|
OmniPeg-DVB-T and DVB-M Stand alone hardware based MPEG-2 or MPEG-4 (Simple Profile) transpot stream Encoder/Decoder card with analog Inputs and Outputs.- analog S-video and/or Composit video In to DVB ASI Out - DVB ASI In to S-video and /or Composit video Out.
|
The OmniPeg DVB-ASI-T/M is supported with drivers and applications for Windows and Linux operating systems. The operation is facilitated through command line interface (described within the SDK manual).The vidserv application enables loading of driver and aids in the selection of various configurations, the config file defines the configurations for selection. The application controls the selection of the OmniPeg DVB-ASI-T (multiple OmniPeg DVB-ASI cards in the same system are supported), selection of configuration and also controls the streaming of data between two cards in the same system, or two cards anywhere on the IP network. In this case a second instant of vidctrl2.exe program is launched.Support for MPEG-1, MPEG-2 MP@ML, MPEG-4 Simple Profile @ L1, L2 and L3, with extensions to full D1 and interlaced video as well as DVB-ASI inputs and outputs are defined in the configuration files. A wide range of pre-configured files are available for testing. Bit rates, resolution and variety of inputs and outputs can be customized by the user and a new config file can be generated.Selecting appropriate configuration files and appropriate parameters in the configuration files via the vidctrl program also controls recording and playback of MPEG4 and 2 files through analog or DVB-ASI outputs, controls S-video, composite video and stereo audio inputs with buffered DVB-ASI output, controls DVB-ASI input with S-Video, composite video and stereo-audio outputs, controls real-time MPEG4, -2, -1 and DVB-ASI encoding, decoding and transcoding and controls encoding and decoding simultaneously .
|
| |
|
